Fauzan Arrofiqi, Achmad Arifin, Benicditus Indrajaya
This paper describes design and test of a wearable FES system for the purpose of improving the performance of gait in patients with post-stroke. The prototype system that was developed includes electrical stimulator and sensor systems. Electrical stimulator was designed to generate pulse train that was realized using non-isolated boost converter. Sensor system was designed to measure gait phases that was realized using FSR sensors and to measure lower limb joint angles that was realized using a fusion of gyroscope and accelerometer-based tilt angle sensor. In order to remove measurement error due to bias error of the gyroscope and fluctuation of tilt sensor, Kalman filter was used to estimate true lower limb joint angles. Each system was tested separately. Testing was done by measuring the stimulator's output on the tibialis anterior muscle stimulation in normal subjects. The characteristics of pulse train in accordance with the desired specifications and capable of producing contractions in the tibialis anterior muscle. Sensor system was tested to measure gait parameters in subjects who walk normally. Comparison of the measured data with existing research data, showed the same pattern of the signal, the magnitude value is still in the standard deviation value of comparative data. © 2015 IEEE.
Biomedical Electronic Engineering Laboratory, Electrical Engineering Department, Institut Teknologi Sepuluh Nopember (ITS), Surabaya, Indonesia; Electrical Engineering Department, PGRI Adi Buana University, Surabaya, Indonesia
Research at a Glance
Register to unlockTopics & SDG Alignment
Register to unlockCollaboration
Register to unlockAuthor Profile (Selected)
Register to unlockReferences Overview
Register to unlockJournal & Source
Register to unlockMetadata & Integrity
Register to unlock